… In which I use genetic algorithms to search for optimal LLVM optimizer passes to make Haskell programs faster …
On a sunny day last Spring, I spent some time playing with genetic algorithms (GAs) for breeding faster Haskell programs, by improving the inlining hints suggested to GHC. The results were pretty cool: the GA found new inlining settings for existing Language Benchmark Game programs — that had already been heavily scrutinized — improving both programs I tried, and in one case, by 18%.
Now, 12 months later, it’s again a sunny Spring day, and we’ve got quite a few new tools to play with in the Haskell world, for working on interesting performance puzzles:
Today we’ll see what more we can extract from the LLVM backend.
GHC Overview
LLVM has a massive suite of low level optimizations, most of which were previously unavailable to the Haskell programmer. GHC has become, in a way, a Haskell to C– to LLVM compiler. (C– is translated to LLVM bytecode, which is then optimized using classic optimizations prior to code generation). To a first approximation, the LLVM optimizer implements Muchnik (recommended reading), and GHC has just imported 25 years of imperative language optimizations. This is exciting for me.
First GHC does masses of source to source transformations on the Haskell Core language (including, e.g. fusion and constructor specialization), before translating Core to C–, an imperative language interface between high-level compilers and optimizing code generators. Some transformations take place here, before spitting out LLVM bytecode using David Terei’s LLVM backend to GHC (PDF).
By default GHC just passes -O3 to the LLVM optimizer, which enables a number of passes, including:
- interprocedural sparse conditional constant propagation.
- combine instructions to form fewer, simple instructions
- dead code elimination and basic block merging
- bottom-up inlining of functions
- promoting “by reference” arguments to be “by value” argument
- transformeing tail recursive calls to local jumps
- reassociating commutative expressions in an order that is designed to promote better constant propagation,
- loop identification and simplification
- a number of SSA analsyis passes
- loop invariant code motion
Now, it is entirely unclear to me whether the default set of optimization passes enabled by llvm -O3 are suitable for the kind of code GHC generates, and I’m not alone in suspecting they’re not ideal. With the GCC backend, we were mostly out of luck in having control over the low level optimizations. The GCC optimization pipeline wasn’t terribly programmable, but LLVM lets us run any analysis or transformation pass in any order we want.
Which LLVM passes to use, and which order to run them, with what analysis in between, is a huge search problem, though. There are roughly 200 optimization and analysis flags, and these, mostly, can be run in any order, any number of times. If we want to run say, twenty of the passes (about what -O3 does), that’s what, about 10^46 arrangements!
So the challenge is to find a set of optimizations that catch some of the idioms in GHC’s generated code, and to hopefully find ways to make Haskell programs even faster.
Making it into a search problem
So I’ll use the approach I took in 2009 for the inlining problem, and use the genetic algorithm library, acovea, to breed the best set of flags for a few programs, where fitness for breeding is determined by total runtime. In this post I’m using GHC head, with the LLVM patch (more info in this post), and a custom patch to remove the default -O3 passed to LLVM.
I first have to give a specification of the flags to GHC + LLVM. Here’s the specification for GHC/LLVM flags that I am going to use — and you can use it too.
Note that LLVM allows us to specify the entire optimization pipeline order on the commandline, including duplicate phases. I don’t think Acovea will apply flags multiple times (no duplicate flags). We’ll see if that matters.
The acovea set of libraries are fairly widely available now, e.g. in Arch Linux. For more background on acovea, see the previous post on inlining — it’s easy to build if not packaged for your distro.
Computing fitness
The programs we want to improve have to report their fitness. To do this I’ll use criterion’s timing function, wrapping up the code we actually want to optimize in some measurement functions. This will just report total wall clock running time for the code under analysis.
We could make our fitness function more robust to noise by using criterion’s sampling and iteration framework, which will run the core code sufficiently often to remove noise. I have notes at the end on what my ideal tool for this looks like.
A warm up: sum of a sequence
To warm up, and see if this stuff works, I’ll begin with the toy program from last week’s fusion post. There, GHC fuses two loops into one, but it fails to collapse that final loop into a constant (something that GCC -O3 can do to manually fused C code). It’s a good test program to see how loops are handled in a new backend.
GHC + GCC isn’t able to spot that the loop is a constant either, however, but maybe GHC + LLVM can. I don’t know what flag I’ll need to have this happen, so let’s run the GA to explore the search space…
First, the code, wrapped in the measurement function:
import qualified Data.Vector as U
import Criterion.Measurement
import Text.Printf
-- code under analysis: sum [1..n] on vectors.
--
v = U.sum $ U.enumFromTo 1 (100000000 :: Int)
main = do
d <- time_ $ v `seq` return ()
putStrLn (secs' d)
secs' :: Double -> String
secs' k
| k < 0 = '-' : secs' (-k)
| otherwise = printf "%.3f" k
We can compile and run this by hand:
$ ghc -Odph --make ex1.hs -fforce-recomp
[1 of 1] Compiling Main ( ex1.hs, ex1.o )
Linking ex1 ...
$ time ./ex1
0.111
./ex1 0.12s user 0.01s system 101% cpu 0.122 total
While it computes the sum, it prints its fitness. Note that it removes any startup or IO cost incurred in measurement. When compiled with standard Haskell optimizations, and the existing native code generator, the program runs in 122ms. The LLVM backend does better, with its default optimizations added to the mix:
$ ghc -Odph --make ex1.hs -fforce-recomp -fllvm -optlo-O3
[1 of 1] Compiling Main ( ex1.hs, ex1.o )
Linking ex1 ...
$ time ./ex1
0.051
./ex1 0.06s user 0.00s system 98% cpu 0.061 total
However, despite the value being a constant, llvm -O3 hasn’t removed the loop. Here’s the assembly of the inner loop:
.LBB1_2:
leaq 1(%rsi), %rax
addq %rsi, %r14
cmpq $100000001, %rax
jge .LBB1_5
addq $2, %rsi
addq %rax, %r14
.LBB1_1: # %tailrecurse
cmpq $100000001, %rsi
jl .LBB1_2
So I take the code, and wrap it up in the GA tool, then go off and do other things for a few hours:
$ time runacovea -input ex1.hs
-config /home/dons/share/libacovea/config/ghc-6_12.acovea
I chopped out the data and graphed it for you. Look at how the mean running times reduced in each generation.
It quickly drops down to the llvm -O3 plateau, then marches past that to turn the loop into a constant.
Optimistic options:
-optlo-globalopt (1.723)
-optlo-loop-unswitch (1.866)
-optlo-mem2reg (2.536)
-optlo-prune-eh (1.627)
Pessimistic options:
-optlo-adce (-1.862)
-optlo-licm (-1.623)
-optlc-O1 (-1.528)
-optlc-O3 (-2.149)
Common:
-Odph -O2 -funbox-strict-fields
-fllvm
-optlo-O2 -optlo-globalopt -optlo-mem2reg -optlo-prune-eh
Once it was done, 4 hours later, I was pretty excited. Look what happened by generation 12! Instead of averaging say, 50ms a run, it was averaging 3ms a run. By generation 16, there was no run time at all.
LLVM did it!
It must have found a way to eliminate the loop entirely.
The flags it recommended were:
-optlo-globalopt
-optlo-loop-unswitch
-optlo-mem2reg
-optlo-prune-eh
So let’s try these out:
$ ghc ex1.hs -Odph --make -fforce-recomp -fllvm -optlo-O2
-optlo-globalopt -optlo-loop-unswitch -optlo-mem2reg -optlo-prune-eh
$ time ./ex1
5000000050000000
./ex1 0.01s user 0.00s system 114% cpu 0.006 total
Bam! Digging around in the assembly, which is munged in all sorts of ways, there it is:
movabsq $5000000050000000, %r14 # imm = 0x11C3793ADB7080
The sum from 1 to n was computed at compile time by GHC and LLVM. Now, it is unclear to me why these optimizations where what was needed — and I seem to get the constant produced with other flags after -optlo-O2 as well (loop-unswitching, mem2reg). So my theory is that many of these passes share a common clean up phase, which is actually doing the work. Anyway, there it is: better code than we’ve ever convinced either -fasm or -fvia-C to generate.
I think this is the limit case for what the GA can do. We know enough information was available statically to compute the entire computation, and standard optimization techniques would get us there. It was just a matter of getting the flags right. It will be interesting to see what improvements the GA can find in code that is less obviously amenable to tweaking.
More realistic?
Let’s trying summing a stream of random numbers — so there’s no clever closed form solution for LLVM to find. Can it just, in general, improve loops in Haskell?
First, the source:
import qualified Data.Vector as U
import qualified Data.Vector.Random.Mersenne as R
import System.Random.Mersenne.Pure64
-- compute the sum of a large vector of randoms generated
-- with the mersenne twister.
--
sums g = U.sum (R.randoms g 10000000 :: U.Vector Int)
main = do
g <- newPureMT
print (sums g)
A vector is generated using the Mersenne Twister, containing 10^7 random 64 bit integers. We then sum those values. GHC fuses this into a single loop where accumulation and random generation are interleaved. That means it is very simple code. Just a loop, a call to the mersenne twister, and an accumulator. There shouldn’t be that much to improve on.
I launch Acovea on it, as before, and 4 hours later we have:
Optimistic options:
-optlo-mem2reg (1.914)
-optlo-scalarrepl (2.413)
Pessimistic options:
-optlo-O1 (-2.577)
-optlo-O2 (-2.64)
-optlo-O3 (-2.515)
Very interesting. the default optimization flags reduce running times, according to Acovea. Let’s check that:
$ ghc --make -Odph -fllvm -optlo-O3 ex2.hs
$ time ./ex2
4460916339009010646
./ex2 0.31s user 0.00s system 90% cpu 0.347 total
And with the “common options” that were suggested:
$ ghc--make -Odph -O2 -funbox-strict-fields -fllvm -optlo-memdep
-optlo-abcd -optlo-loop-unroll -optlo-mem2reg -optlo-scalarrepl
$ time ./ex2
4322192527286846546
./ex2 0.28s user 0.01s system 97% cpu 0.302 total
So it found a 13% improvement over the default llvm flags.
Sum of Squares
Now, something relatively serious, the sum of squares of a random vector. First, in Haskell.
-- compute the sum of squares of a vector.
--
sumsq g = U.sum (U.map (\x -> x * x) vector)
where
vector = R.randoms g 10000000 :: U.Vector Int
GHC then fuses the three loops here (generation, mapping and summing), into a single loop with no allocations, which is then ready for low level optimizations.
After crunching away for 4 hours, Acovea recommends:
Optimistic options:
-optlo-loop-reduce (1.59)
-optlo-scalarrepl (2.079)
Pessimistic options:
-optlo-O1 (-2.591)
-optlo-O2 (-2.537)
-optlo-O3 (-2.591)
-optlc-O0 (-2.591)
-optlc-O1 (-1.722)
With regular flags, we get:
$ ghc -v0 --make -fforce-recomp -O2 -funbox-strict-fields
-fllvm -optlo-O3 -optlc-O3 ex3.hs
$ time ./ex3
8241655411004882824
ex3 0.30s user 0.01s system 96% cpu 0.315 total
And indeed, it’s “best of the best”, we get faster code:
$ ghc -v0 --make -fforce-recomp -Odph -O2 -funbox-strict-fields
-fllvm -optlo-disable-inlining -optlo-basicaa -optlo-basiccg
-optlo-count-aa -optlo-domfrontier -optlo-domtree
-optlo-globalsmodref-aa -optlo-memdep -optlo-no-aa
-optlo-postdomtree -optlo-codegenprepare -optlo-abcd
-optlo-functionattrs -optlo-block-placement -optlo-constmerge
-optlo-constprop -optlo-die -optlo-dse -optlo-globaldce
-optlo-globalopt -optlo-indvars -optlo-inline -optlo-ipconstprop
-optlo-ipsccp -optlo-lcssa -optlo-loop-deletion -optlo-loop-index-split
-optlo-loop-unroll -optlo-loop-unswitch -optlo-loopsimplify
-optlo-mem2reg -optlo-memcpyopt -optlo-scalarrepl
-optlo-tailcallelim ex3.hs
$ time ex3
4829650279590649126
ex3 0.29s user 0.01s system 100% cpu 0.296 total
Finding, again, 10% or so.
And though this is a little more complex (3 arguments in the loop, instead of two), GHC turns this:
sumsq g = U.sum (U.map (\x -> x * x) vector)
where
vector = U.enumFromN 1 10000000 :: U.Vector Int
with the same set of flags as the first version, into something that goes from running 228 ms with default LLVM flags to 14 ms with the flags found by Acovea in the first example (which seem to work really well for enumerations!).
Summary
The LLVM optimization layer for GHC adds a huge amount of mostly untapped potential. The optimization space is huge, and using a GA or similar approach to custom-optimize particular programs can be useful for finding common flags, or special purpose flags for niche applications (like scientific simulations). One downside is that it can take quite a while to find a solution. We could speed things up in at least two ways: Additionally, we don’t yet have a way to generate multiple passes (maybe we should run -optlo-$foo 10 times!). GHC just keeps running its optimizer until the code stops changing, maybe we need a similar approach with LLVM?
I also speculate that the large loop bodies generated through significant fusion should give LLVM some good straight line code to work on.
My next step is to wrap up this approach into a simple Haskell library, modelled on Criterion, such than Haskeller can easily try this:
import Evolution
main = evolve main'
which will take ‘main’, and start evolving the flags used to compile it, against the current GHC/LLVM spec. It will use criterion to compute the fitness in a robust way (so you don’t need to worry about short or long running times), and at the end will generate a graph of the evolution, and a recommended set of flags to use in future. That’ll be useful to a few people.
We could then apply this tool to all of nofib to compute a general set of useful LLVM flags to use for everyone. Finally, there’s still much scope to improve the bytecode going into LLVM, so that more of the analysis phases will fire. Any Summer of Code students interested?
LLVM also supports plugins loaded on the command line. I’d love to be able to write new passes in Haskell, and load them into LLVM on the fly. This might really make it easy to try out some new FP-specific passes on the SSA-alike representation. Another good Summer of Code project…
The LLVM optimizing backend is fun!
